临近空间高超声速目标跟踪方法研究?

临近空间高超声速目标跟踪技术研究在空天防御系统中具有重要军事意义和理论价值。本文综述了临近空间高超声速目标跟踪中的目标运动建模、目标跟踪算法等研究内容的研究进展，并对其存在的问题进行了深入分析。针对这类目标跟踪存在的问题，结合临近空间高超声速目标探测跟踪需求，指出了临近空间高超声速目标跟踪技术的研究思路，为相关研究提供了参考。     

金属热防护系统瞬态热分析的并联一维模型

建立了可重复使用运载器金属热防护系统瞬态热分析的并联一维模型.根据热防护系统的结构特点划分了多条热流通路,将各热流通路离散化后给出了单条通路瞬态传热的隐式差分格式,采用热平衡法推导了串、并联两种类型公共节点的局部控制方程,并给出了传热问题中常见边界条件的统一表达式,最终形成了总体控制方程.通过数值计算获得了热防护系统瞬态温度场.计算结果表明:采用并联一维模型可以更真实、更准确地反映热防护系统的传热过程,对于热防护系统结构优化设计有较高的参考价值.     

Consecutive k‐within‐m‐out‐of‐n:F system with exchangeable components

As a generalization of k‐out‐of‐n:F and consecutive k‐out‐of‐n:F systems, the consecutive k‐within‐m‐out‐of‐n:F system consists of n linearly ordered components such that the system fails iff there are m consecutive components which include among them at least k failed components. In this article, the reliability properties of consecutive k‐within‐m‐out‐of‐n:F systems with exchangeable components are studied. The bounds and approximations for the survival function are provided. A Monte Carlo estimator of system signature is obtained and used to approximate survival function. The results are illustrated and numerics are provided for an exchangeable multivariate Pareto distribution. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

贪心遗传算法解决一般武器-目标分配问题

一般武器-目标分配问题,是使武器发挥最大效能而使目标遭受最大毁伤的最优化问题.遗传算法广泛用于解决最优化问题.提出一种具有贪心优化机制的局部搜索方法,以提高遗传算法的搜索效率,从而迅速找到全局最优解.应用于炮兵武器-目标分配问题的仿真试验结果表明,此算法比现有的其他搜寻算法具有更好的求解效率.     

空降兵师(团)登岛作战兵力分配模型

通过结合空降兵师(团)级登岛作战的战术特点,确立了遮断点的单点和联合价值的指标体系,建立了以联盟博弈为基础的兵力分配初步模型,然后以Shapley值作为此联盟博弈的解,结合投放过程中的兵力损耗,得到一个合理的兵力分配方案,从而建立了师(团)级空降登岛作战的兵力分配模型和算法.     

考虑随机回放的卫星数传调度问题的一种求解方法

针对考虑随机回放的卫星数传调度问题,从置换空间到调度解空间的映射方法和置换空间的搜索算法两方面进行了研究.提出了一种时间窗优先的置换序列映射算法,并证明该映射算法可以将置换序列映射到调度解空间上的最优解.提出了一种遗传随机搜索算法,基于有记忆功能的随机邻域搜索,在置换空间上搜索产生优化调度的置换序列.仿真计算表明,遗传随机搜索算法可以增强遗传算法的局部搜索能力,在搜索结果上平均获得了2.72%的改进.     

Linux下某型制导弹目标跟踪并行算法

针对某型电视制导弹的图像特点,在Linux平台上设计了一种并行算法用于完成目标跟踪.算法思想:将制导弹的目标跟踪任务划分为图像采集、纠旋、显示和目标跟踪,程序中创建两个线程用于完成该任务;其中线程1完成图像采集、纠旋和显示;线程2完成目标跟踪.实验表明该算法实现了Linux环境下图像的实时采集、纠旋、显示和目标跟踪,与Windows下的目标跟踪算法相比,该算法有效的节省了资源.     

基于改进单亲遗传算法的军事物流中心选址问题研究

为了有效求解军事物流中心选址问题，在单亲遗传算法加入模拟退火选择操作，与倒位算子和非均匀变异操作相结合，构建了退火单亲遗传算法。在选择操作中，采用三复本锦标选择的方式，确保了种群的多样性。计算结果表明该方法可有效求解选址问题，取得较一般遗传算法更优的结果，算法的搜索效率和收敛概率均得到大幅度提高。     

开口电极在海水中的电场特性研究

利用稳恒电磁场理论,通过基本假设和单个电极电场计算公式的推导,计算了某一深度平面的电场值,绘制了平面分布图。接着利用相似理论进行了模型缩比实验,测量了二电极电场在某一平面上的分布值,绘制了平面分布图,进行了基本特性分析。该结果对进行船舶电场模拟和海缆断点探寻等工作,具有很好的参考价值。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.